Principles Of Two-Shot Molding

Jan 20, 2026

Leave a message

Two-shot molding (also known as two-color or dual-material injection molding) is an injection molding process that combines two different plastic materials into a single product through two sequential injections, facilitated by the rotation or switching of the mold.


Core Steps: First, the initial material (Material A) is injected into the mold to form a partial component of the product. After the mold opens, this semi-finished part remains attached to the moving side (core side) of the mold. Subsequently, the mold rotates (typically 180°) or shifts to a different position; the mold then closes for a second injection, during which the second material (Material B) is injected to encapsulate or bond with Material A, ultimately cooling and solidifying into a complete two-color or dual-material product.

 

Equipment and Molds: This process typically utilizes specialized two-shot injection molding machines equipped with two independent barrels and injection systems. Mold design is critical; common structural configurations include rotating core molds or molds with a rotating central plate. These designs require the two sets of mold cavities to be precisely matched to ensure accurate alignment following the rotation.

Send Inquiry